Showing posts with label tutorial. Show all posts
Showing posts with label tutorial. Show all posts

Monday, March 23, 2015

WIP Progress, Springing and a Tutorial!

Hi peeps! 



How is everybody doing today??? Did ya miss me? Laid low again with a weather-sparked migraine that lasted a week, eek! 

Before I was incapacitated I managed to get my citrus batik table topper put together-border and all! I am still amazed at how pain-free the HST's were…guess I never bothered to measure and trim them before…ha ha ha...it had been that long since I worked with HST's! 

I have spray-basted it to some older-stash fabric and am good to go for quilting…but I am still undecided on which pattern to FMQ(free-motion quilt) with my Pfaff. It will be on our large coffee table and will get spilled on, folded over and generally well-used so I think it should be densely quilted. The one that is on the coffee table now was quilted with a fairly tight meander and while that is the easiest FMQ design to do, I am a little bored with it.

This was made with two packs of Timeless Treasures charms I got from Craftsy during their Boxing Week Clearance Sale. I actually bought 4 from them and don't know just yet what I'm going to do with the other two packs. I had a few squares left over from the above project as I was working with specific dimensions, so I'd like to work them into the next project as well.



I took this picture early last week. This is part of the tree that is in our minuscule back area. This one usually grows so much in the summer months that it ends up touching our kitchen windows! Now, would you believe, the buds are fully open and little leaves are starting to grow.


Home-Made Spray Starch Tutorial

I don't really like to use the spray starch in a can as it has an icky slightly-sweet smell…and of course, the fumes and the ozone layer. This recipe is a mix of a couple I have seen online with a few personal tweaks!

You will need:

2 cups of cold tap water
4 Tablespoons of cornstarch
1 Tablespoon of vodka(yes, really…very important)
5 drops of Lavender essential oil(or a favourite, just not a citrus-based one as even small amounts might cause a stain)
1 spray bottle(got mine at the dollar store)
-mixing bowl, measuring cup for liquids, measuring spoons, fork and a funnel



In your mixing bowl combine the water, vodka and cornstarch and mix well using a fork. Don't add the essential oil yet!


With the help of your funnel, pour the resulting liquid into your spray bottle. Remove the funnel and add your essential oil. I use lavender as it has a nice smell, but you could use a different oil such as peppermint or rosemary...but no citrus-based oils as they can leave oil spots on your items!

Now give your spray starch a hearty shimmy & shake. This helps to mix the essential oils in well. The reason I wait till the end to add the essential oils is that I don't want to waste any of it in the mixing bowl. Just mixing the oil in with a fork will not disperse the oil throughout the spray starch mixture and some of the oil will stick to the bowl's sides, which is a waste in my opinion.


Now, keep your spray starch near you ironing board and spray, spray, spray away, but use sparingly-a little will go a long way! Just remember to give it a good shake before each use as the cornstarch tends to settle to the bottom once the bottle is set down. 

It should stay fresh for a month or two! When not in use, I put mine in the fridge and it lasts longer.

If you find that you have some white residue on your fabric after the spray has dried, just give the area a little swipe with your fingers or a damp cloth. The white residue is just plain old cornstarch!

Why the Vodka you ask? Vodka(or any clear alcohol, but not rubbing alcohol) acts like a dispersant and a binder(emulsifier)-helps the essential oils mix with the water, and will also help the spray starch stay fresh, as it is a preservative.

Enjoy!


Thanks so much to the peeps who commented about my new vintage Singer machine! I was directed to a couple different websites and can now say I know this about her:
Model#15-91
Made in St. John's, Quebec, Canada in 1948

My model was one of the first of these models to come off the assembly line, as I noticed there are some things missing: the face of the stitch lever(on the right) doesn't have any numbers on it for stitch length and there is no gold "Made in Canada" decal situated on the top of the machine head.

I also now know that I put the needle in the wrong way...DUH! While on modern machines you put the needle in with the shank facing the back, this Singer must have the needle shank facing the left! 

I have also started looking on eBay and Etsy for a Walking Foot and a few other things I like to have. Someday I would like a wooden cabinet to store her in, so I could set her up in the living room and not have to move her on and off the kitchen table…Featherweight she is not!!!


Today is the last day of Craftsy's Spring Blowout Sale! Scoot on over for amazing deals on fabric, sewing kits, and quilting kits!


I have been looking longingly at this kit: Letters Home Tea and Biscuit Table Runner since Craftsy first shared it! When you use this link, just scroll down the page to see the kit. It is on sale HALF PRICE for $25.43(this is the price in CA$-it will be much cheaper in US$)!!!

They even have a few of the lovely Aurifil thread sets…but these are going fast.

Question of the Day: 

 How should I machine-quilt my citrus batik table topper? I really need some ideas peeps!

Sharing is caring!!! 

Don't forget that I am happy to share…feel free to pin to Pinterest, post on Google+ and Facebook, and Tweet away! Just please make sure your posts link back to this blog. 

*If you mouse/hover over the top right corner of my photos, a red pin-it button will show up and all you have to do is click it to be taken to Pinterest. There is also another red button right beside it for posting to Facebook and Twitter. Or, you could always use the little grey square buttons at the end of this post.



Thanks for reading and have a great day! 

Quilty Huggs, 

Jacqueline 

PLEASE NOTE: The writer of this blog accepts forms of compensation such as, but not limited to; fabric/notions/patterns/books in exchange for a posted review. All comments/critiques/opinions are completely my own and are not those of the provider. This post may also contain affiliate links and I will receive a small commission if you make a purchase after clicking on my link. Thanks!

Tuesday, February 3, 2015

Tutorial Tuesday: Deconstructing a man's cotton dress shirt for it's fabric!

Hi peeps!



So I thought I would show you how I take apart a men's dress shirt for the purpose of using the fabric for quilting. I like using X-L or Large-sized long-sleeved 100% cotton men's shirts as you get the most useable fabric out of them.

Here we go! 

Pick up a men's dress shirt from your local thrift store, or even your husband's closet-just make sure it's one he doesn't wear anymore! I get mine at Value Village, usually when they have a half price sale. Give it a good wash and dry. You'll be tempted to iron it, but I have found it easier to just start cutting as-is, then give the fabric pieces a nice press afterwards.


Start by cutting the collar(with collar-yoke attached), cuffs and button plackets off. 


Cut off all the sewn edges of the cuffs and collar, removing the collar yoke at this time. I save all the buttons of the shirt and safety pin them together(bottom left of photo).



 

Turn the entire shirt inside out and remove the sleeves by cutting them away just below the  shoulder seam line. Cut out the button placket too(as above) and add the buttons to the safety pin you have already started for this shirt.


 

Next, cut the shirt-back away from the shirt-fronts at the shoulders, again cutting just before the seam allowance. Cut the yoke off of the top of the back piece, then cut around the edges of the yoke to separate it into two pieces.

Edited to add: I usually trim the bottom hems off at this step.


If one of the shirt-fronts has a pocket, cut that front section right across the middle side to side, just under the pocket. Then cut around the three sides of the pocket(left, right and bottom), just inside the seam. You can see the two pocket pieces and cut-aways above left.

Or, you could save the pocket for another project such as; using it when you construct a tooth-fairy pillow or, hand-sew the pocket to your quilt back, after you have finished quilting it. Then you can store a few pieces of the fabrics that you used in the quilt for mending it if it gets damaged or worn. Just make sure you leave yourself a nice seam allowance(before cutting) so that you will be able to sew the pocket into your item and to sew the little pocket full of fabric shut if it is stitched to the back of a quilt.



Here you can see the skinny strips above left (from the cuffs and collar), as well as the two yoke pieces and both front sections. I have ironed all pieces at this point, except for the button areas. The skinny pieces will go into my tub for string quilts, and I will probably cut the larger pieces into my favourite sizes( 2" sq, 2.5" sq, 4.5" sq and 5" sq charms).


Here are the back(folded) and sleeves(folded). The sleeves are great for cutting 2'5" strips and they will go into my strips tub. It always surprises me how much fabric is in a sleeve! I will leave the back as-is, as it is quite a large piece of fabric. This one measures 24" by 27" at it's widest points.


This is perfect TV work. I will grab my handy little seam ripper and release the buttons from the plackets, then I will store them on that same safety pin, in my button jar. The label is easy enough to remove with same ripper. Then, to camouflage the stitch holes where the label was, I just run the tip of my seam ripper gently across them. You will see the stitch holes 'magically' disappear.


This little pile is ALL that is left over. Pretty cool, eh?


I got started on the table runner I mentioned in this post

I finally got my Frixion pen to work. The little metal ball at the tip of the pen was stuck, so I got some rough, heavy-duty paper(that had some 'tooth' to it) and just scribbled away till the roller ball started working. Oh, duh!!!


I was having so much fun(not!) drawing the sewing lines on my pairs of squares that I went overboard(didn't pre-read the pattern…) and traced out the sewing lines on ALL of the squares. Double-duh!!! But it is with the Frixion ink and the marks will just iron away.

Then, over to my chair, watching TV, I used my 'special' pins(they are very short and very sharp and I keep them for when I am working on batiks only) and just pinned near my starting and ending lines. Now I am ready to shoot them through the sewing machine.


I found a new-to me magasine at the grocery store today. It is called Make it Vintage, and has loads of ideas for changing up old or thrifted items and making them your own. There was another magasine that was similar, called Vintage Style, but it was a lot more than I am willing to spend on a magasine…so I just had a quick look through it!

Question of the Day:

Have you bought, or looked through a new-to-you magasine lately? and, if so, which one was it?
Thanks for reading and have a great day!


Quilty Huggs,

Jacqueline

Wednesday, August 6, 2014

FREE TUTORIAL: Adding a decorative flange border

Hi peeps!

Today I'd like to share my method for adding a flange border to the outside edges of a quilt. Note: this is just the way I do it, you may have your own method of doing this.

I am using the Layer Cake Lemonade from Fat Quarter Shop quilt top I demo-ed in this post.



Measure the four edges of your quilt and cut enough 1"-wide strips to go all the way around, with a good half yard extra. I cut 6 x WOF x 1" strips and had about a half yard long strip extra at the end.



Piece your strips together on the diagonal, like you would for piecing binding strips together. Trim excess fabric from the joined ends, making sure to leave about a quarter inch seam allowance. Piecing the strips on the diagonal will reduce bulk once you have pressed the long skinny strip in half.


Press your seams open. I leave the little tags poking out so it is easier for my chubby fingers to separate the seam allowance! 

I think I need to make a new ironing board cover...


Press the long strip in half, width-wise. As you can see, the seam allowance faces in two directions, eliminating the bulk in the skinny strip once it is folded.



Fold the long, folded strip in half, lengthwise and push a safety pin through the two ends. Sorry, blurry..one-handed photo!


Lay your quilt on the floor(carpeting works a charm here!). Pin the safety pin into the carpet pile(I actually press the pin into the foam underlay, just don't tell the Hubs!), making sure that the strips line up with the edge of the quilt top.



Gently lay the flange strips down the middle of the quilt top. Make sure to pull the flange strips slightly so that there are no excess bends or loops in the strips.


Trim both pieces at the same time so your quilt sides will be equal.



Do the same thing through the width of the quilt.



Starting down the right side, pin a flange strip end to the top and bottom corners, raw edges to the outer side. The folded edge of the flange strip should be facing the centre of the quilt top.


Fold the quilt top in half, top to bottom and mark the center point with a pin. Do the same with the flange strip. Match both center points and pin together. Next comes my least favourite part…get down on the floor and pin/clip the raw edges of the flange strip to the outside edge of the quilt top. Oh, my knees!!!

You may have to ease the quilt top edge (or the flange strip) in a little to make the end edges meet. I know I did!

Do the same for the left side.


Now comes sewing the flange to the quilt top. I like to set my needle one click to the right, so that I am sewing less than a quarter inch from the edge. 

This is important as when you go to sew the final border on with a true quarter inch seam, your flange seam will not show. I learnt this through trial and error!



Gratuitous sewing shot. I love, love my Clover Clips!!!


Now pin/clip your a flange strip to the top edge, again folding your quilt top and flange strip in half. Pin at each end and match up and pin your centres. Pin and ease in excess fabric, as needed.

Sew, sew sew!!!





Once you are done sewing the four flanges on, it is time to head on over to the cutting board. Trim off any loose fabric threads and the little points where you joined your flange strips together. This is especially important if you have chosen an outer border fabric that is light in colour. Everything will show through.

This only takes 5 minutes, but boy is it ever worth it.


Press your quilt top from the back. This will set your stitches and flatten any bumps/bulges that may have occurred…ahem...


Now, turn your quilt top over to the front and press well. This will give your flange border a crisp knife-edge.


Ta-da!!!

You are done!

I hope you enjoyed my first-ever tutorial. Stay tuned for a tutorial on the Two Brothers border technique!

Please do comment and share with your friends. Feel free to pin to Pinterest.

Thanks for reading and have a great day!

Jacqueline

Saturday, August 2, 2014

Showcase Saturday-Layer Cake Lemonade!

Hi peeps!


Today's post is brought to you by the generous folks at Fat Quarter Shop. They sent me this layer cake so I could do up a little demo of their Layer Cake Lemonade pattern. 

The link for the pdf pattern is here

They also have a great video on Youtube, which you can find here.


I chose the Mixed Bag layer cake as I thought the colours looked fresh and summery.




I did as the pattern suggests and separated my squares into two piles, one dark and one light.

 It turns out that you will have a few extra if you have a 42-piece layer cake, so if you were wanting to purchase a bali 40-piece one, you would still have enough squares to make the pattern.


I just tossed my completed rows on the floor as I was piecing them. I think they look like a happy mess!




I laid my finished rows on the floor(no room for a design wall), and played around with them a bit. I do admit that I took one of the skinny rows apart, and changed things up a bit. But that I just me being a Virgo!!!



These are my leftovers. I will use some of them to make cornerstones on my added border.


Here are the fabrics I will use for the borders(this is something I am adding, and not in the pattern). The orange will be a narrow 1/4" flange, then Kona-snow. The binding is a Caryl Bryant print from my 'old' stash!



This is the backing fabric I have chosen. The green binding will show nicely on this print.


Here is the completed quilt top, per the pattern. I will talk in greater length about adding a flange border in a later post.


I was on such a roll that I even got the binding pieced and pressed! I had to cut it a 2 3/8" as I only had about 5/8ths of a yard. As you can see by the little strip left, I had barely enough! Now I have another strip for my string quilt bag!

Thanks for reading and have a great day!

Jacqueline